Hola

Appendix 3: Wireless Equipment Vendor Information • • • BelAir100 Wireless Multi-Service Node Proxim ORiNOCO AP-4000MR-LR HP ProCurve MultiService Mobility Outdoor Access Point Series

Data Sheet

BelAir100 Wireless Multi-service Node
The BelAir100 Wireless Multi-service Node is the industry’s highest performance and most flexible dual-radio wireless mesh node. It provides mobile broadbandsupport for Wi-Fi, WiMAX, and 4.9 GHz Public Safety spectrums. Offering true standards-based seamless mobility, the BelAir100 ensures that subscribers do not experience service interruptions to critical applications, like voice and video, as they move throughout the wireless mesh network.

Dual-radio architecture
The dual-radio design of the BelAir100 provides support for Backhaul RadioModules (BRMs),WiMAX Radio Modules (WRMs) and Access Radio Modules (ARMs) in the same wireless mesh node. The BelAir100 can be configured with a backhaul radio module (BRM or WRM) and access radio module (ARM) for traditional wireless mesh; or with any combination of dual BRMs or WRMs for a resilient backhaul only deployment.

Features
• Modular dual-radio architecture • Supports Wi-Fi and WiMAX •Seamless mobility for uninterrupted service • Network Management via CLI,WEB or BelView NMS • Electrical and optical Ethernet interface options

Wireless radio modules
The BelAir100 can contain any combination of ARMs and BRMs, providing the ideal flexibility and capacity for largescale wireless mesh networks. The ARMs and BRMs support a broad range of Wi-Fi (IEEE 802.11a/b/g),WiMAX (IEEE802.16d), 4.9 Public Safety and Cellular (via a T1/E1 Circuit Emulation Module) applications making it the most versatile solution on the market for providing multi-service capabilities over a wireless mesh network.

Radio module options
• Access Radio Module (ARM) IEEE 802.11a/b/g & 4.9 Public Safety • Backhaul Radio Module (BRM) IEEE 802.11a pre-WiMAX & 4.9 Public Safety • WiMAX Radio Module(WRM) IEEE 802.16d • Radios available in multiple frequency bands - licensed: 2.3 GHz, 2.5 GHz and 4.9 GHz - unlicensed: 2.4 GHz and 5.25-5.85 GHz

Layer 2 networking capabilities
The BelAir100 has an integrated Layer 2 Switch engine that provides extensive QoS,VLAN, Network Security and Traffic Management capabilities that are necessary for transporting mission critical, time-sensitiveapplications like voice and video.

Network Management
The BelAir100 can be managed via a Command Line Interface (CLI),WEB GUI or with BelAir Networks BelView Network Management System (NMS). Both CLI and WEB GUI provide device level support, and BelView NMS provides complete network-wide support for Fault, Configuration and Performance Management. BelView NMS works on either Windows XP or SUN Solarisplatforms and can also be integrated into other management systems like HP OpenView or IBM NetView. BelAir Networks is the leading provider of mobile broadband mesh networking solutions. Cities around the world rely on BelAir to deliver industry-leading broadband performance and scalability, and carrierclass capacity and reliability. BelAir Networks teams with world-class global partners todeploy proven, cost-effective wireless broadband mesh networks.

Security
• Authentication: 802.1x (RADIUS) and EAP methods • Encryption:WEP 64 and 128 bit,TKIP / MIC per 802.1x, 802.11i AES • MAC address access control lists • Rogue AP detection

Approvals
• Radio: FCC part 15 and part 27, EN 300 328, EN 300 440, EN 301 893 and Industry Canada RSS 210 Issue 5 • EMC: FCC 47 CFR part 15, subpartB Class B and EN 301 489-1/-17 Class B • Safety: ANSI/UL std no.60950-1, CSA-C22.2 std no. 60950-1, CB-60950-1 • Laser safety: Class 1 laser product complies with 21 CFR 1040 and IEC60825 • RF safety: FCC OET Bulletin 65, Health Canada Safety code 6 • Outdoor use: IP56/NEMA4/NEMA4X for wet and dusty conditions • CE! mark • Mexico: NOM • Korea: MIC2003-15 • Russia: GOST-R • India: ETA-74/2005,...