Manual de partes hyosung

HYOSUNG MOTORS & MACHINERY INC.

2nd Ed.

Part No. 99011HP9510 OCT. 2005. Printed in KOREA

For U.S.A

This manual should be considered a permanent part of the motorcycle and should remain with the motorcycle when resold or otherwise transferred to a new owner or operator. The manual contains important safety information and instructions which should be read carefully before operatingthe motorcycle.

1

FOREWORD
THANK YOU for choosing Hyosung motorcycle. We at Hyosung have designed, tested and produced this motorcycle using the most modern technology available to provide you with much happy, enjoyable, safe riding. Motorcycling is one of the most exhilarating sports and insure your riding enjoyment, you should become thoroughly familiar with the information presented inthis Owner’s Manual before riding the motorcycle. The proper care and maintenance that your motorcycle requires are outlined in this manual. By following these instructions explicitly you will insure a long trouble-free operating life for your motorcycle. Your Hyosung dealer has experienced technicians that are trained to provide your machine with the best possible service with the right tools andequipment. All information, illustrations photographs and specifications contained in this manual are based on the latest product information available at the time of publication. Due to improvements or other changes, there may be some discrepancies in this manual. Hyosung reserves the right to make changes at any time. Please note that this manual applies to all specifications for all respectivedestinations and explains all equipments. Therefore, your model may have different standard features than shown in this manual.

HYOSUNG MOTORS & MACHINERY INC.

� COPYRIGHT HYOSUNG MOTORS & MACHINERY INC.

2

IMPORTANT
BREAK-IN INFORMATION FOR YOUR MOTORCYCLE The first 1,600km(1,000miles) are the most important in the life of your motorcycle. Proper break-in operation during this timewill help ensure maximum life and performance from your new motorcycle. Hyosung parts are manufactured of high quality materials, and manufactured parts are finished to close tolerances. Proper break-in operation allows the machined surfaces to polish each other and mate smoothly. Motorcycle reliability and performance depend on special care and restraint exercise during the break-in period. It isespecially important that you avoid operating the engine in a manner which could expose the engine parts to excessive heat. Please refer to the BREAK-IN section for specific break-in recommendations.

WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information the words 『 WARNING』 , 『 CAUTION 』 『 NOTE 』 and .

WARNING
The personalsafety of the rider may be involved. Disregarding this information could result in injury to the rider.

CAUTION
These instructions point out special service procedures or precautions that must be followed to avoid damaging the machine.

N O T E
This provides special information to make maintenance easier or important instructions clearer.

3

WARNING
Noise Control System(muffler assembly)TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED
Owners are warned that the law may prohibit : (a) The removal or rendering inoperative by any person other than for the purpose of maintenance, repair or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its any sale or delivery to the ultimate purchaser or while it is in use ;and (b) The use of the vehicle after such device or element of design has been removed or rendered inoperative by any person. MAINTENANCE: The exhaust system of this motorcycle requires no periodic maintenance. ’ The engine should be adjusted to the manufacture’ specifications and the s spark plug should be kept in good condition. Running the engine with incorrectly operating spark plug or...