Planeación y estrategias didácticas para los campos de lenguaje y comunicación, y pensamiento matemático.
Páginas: 4 (942 palabras)
Publicado: 14 de marzo de 2011
MANUAL BENDER P/N MB1000M
WARNING
1. Always pay close attention to what you are doing. Turn off cell phone, pager, or any other distraction when using this machine. 2. This machine is meant to beoperated by competent individuals who have a thorough understanding of tube bending and machines in general. 3. The bender is intended to be used by a single operator. Never allow a second individualto operate the machine while another holds tube. 4. Always wear eye protection while operating tube bender. 5. Never put your hands or other body parts into bender apparatus. 6. Never wear looseclothing while operating tube bender. 7. Always work in a clean, safe, well lit, level work area. 8. Never use the wrong size die/type die for the tube being worked. 9. Never operate the tube bender withbroken, worn or damaged parts. 10. DO NOT attempt to repair and reuse any damaged bender parts. 11. User assumes all risks when using this product. 12. This is a hand operated machine only. DO NOT usea bender handle longer than supplied with the unit. Over stressing of the unit will occur. NOTE JMR recommends that the MS1000M Manual Bender be mounted on the JMR Manufacturing's MBS100 BenderStand. Optionally, the Manual Bender may also be mounted on a solid and secure work surface.
1/19/2006 BASIC
IF YOU HAVE ANY QUESTIONS PLEASE CALL JMR MANUFACTURING
PHONE: 805.239.5972
FAX:805.239.5973
OPERATION OF THE BENDER WARNING This is a hand operated machine only. DO NOT use a bender handle longer than supplied with the unit. Over stressing of the unit will occur. 1. 2. 3. 4. 5.Figure 1 is an overall view of the manual bender and a detail of the bender head. The tubing should be clean and free from defects. Always grease the die block prior to bending. Make sure that alldrive pins are fully seated. Pass tube into die and position as required for start of bend. All bends will start at the edge of the radius die as shown in Figure 2. 6. Under normal use, the pivot...
WARNING
1. Always pay close attention to what you are doing. Turn off cell phone, pager, or any other distraction when using this machine. 2. This machine is meant to beoperated by competent individuals who have a thorough understanding of tube bending and machines in general. 3. The bender is intended to be used by a single operator. Never allow a second individualto operate the machine while another holds tube. 4. Always wear eye protection while operating tube bender. 5. Never put your hands or other body parts into bender apparatus. 6. Never wear looseclothing while operating tube bender. 7. Always work in a clean, safe, well lit, level work area. 8. Never use the wrong size die/type die for the tube being worked. 9. Never operate the tube bender withbroken, worn or damaged parts. 10. DO NOT attempt to repair and reuse any damaged bender parts. 11. User assumes all risks when using this product. 12. This is a hand operated machine only. DO NOT usea bender handle longer than supplied with the unit. Over stressing of the unit will occur. NOTE JMR recommends that the MS1000M Manual Bender be mounted on the JMR Manufacturing's MBS100 BenderStand. Optionally, the Manual Bender may also be mounted on a solid and secure work surface.
1/19/2006 BASIC
IF YOU HAVE ANY QUESTIONS PLEASE CALL JMR MANUFACTURING
PHONE: 805.239.5972
FAX:805.239.5973
OPERATION OF THE BENDER WARNING This is a hand operated machine only. DO NOT use a bender handle longer than supplied with the unit. Over stressing of the unit will occur. 1. 2. 3. 4. 5.Figure 1 is an overall view of the manual bender and a detail of the bender head. The tubing should be clean and free from defects. Always grease the die block prior to bending. Make sure that alldrive pins are fully seated. Pass tube into die and position as required for start of bend. All bends will start at the edge of the radius die as shown in Figure 2. 6. Under normal use, the pivot...
Leer documento completo
Regístrate para leer el documento completo.