Estudiante

Features
s s s

Compatible with automatic insertion equipment Superior package integrity Marking on contrasting background for permanent identification

For information on specific applications, download Bourns’ application notes: DRAM Applications Dual Terminator Resistor Networks R/2R Ladder Networks SCSI Applications

4100R Series - Thick Film Molded DIPs
Product CharacteristicsResistance Range ......................10 ohms to 10 megohms Maximum Operating Voltage...........100V Temperature Coefficient of Resistance 50Ω to 2.2 MΩ..................±100ppm/°C below 50Ω ........................±250ppm/°C above 2.2 MΩ...................±250ppm/°C TCR Tracking ..........................50ppm/°C maximum; equal values Resistor Tolerance ................See circuits OperatingTemperature ...................................-55°C to +125°C Insulation Resistance ..................10,000 megohms minimum Dielectric Withstanding Voltage .............................................200 VRMS Lead Solderability .....Meet requirements of MIL-STD-202 Method 208 Environmental Characteristics TESTS PER MIL-STD-202.........∆R MAX. Short Time Overload...................±0.25% Load Life.....................................±1.00% Moisture Resistance ...................±0.50% Resistance to Soldering Heat .................................................±0.25% Terminal Strength........................±0.25% Thermal Shock............................±0.25% Physical Characteristics Flammability .........Conforms to UL94V-0 Lead Frame Material ..........................Copper, solder coatedBody Material ..................Novolac epoxy Package Power Temp. Derating Curve Product Dimensions

4.00

PIN #1 REF.
3.50 3.00 2.50 2.00 1.50 1.00 .50

4120R 4118R 4116R 4114R 4108R

11.81 MAX. (.465)

27.05 MAX. (1.065) 24.51 MAX. (.965) 21.97 MAX. (.865) 19.43 MAX. (.765)

WATTS

4.57 + .12/ - .28 (.180 + .005/ - .007)

.89 ± .25 (.035 ± .010) TYP. 2.54 ± .25 (.100 ± .010*)TYP. NON-ACCUM.

2.03 ± .12 (.080 ± .005)

8.40 MAX. (.331) 3.43 + .38/ - .25. (135 + .015/ - .010)

0

25

70 125 AMBIENT TEMPERATURE ( °C )

1.65 + .12/ - .07 (.065 + .005/ - .003) .438 ± .050 TYP. (.019 ± .002)

Package Power Rating at 70°C 4108R......................................1.69 watts 4114R......................................2.00 watts4116R......................................2.25 watts 4118R......................................2.50 watts 4120R......................................2.80 watts Typical Part Marking
Represents total content. Layout may vary.
PART NUMBER
4114R-1152 YYWW

7.87 ± .25 (.310 ± .010) TO OUTSIDE WHEN PINS ARE PARALLEL .254 ± .050 (.010 ± .002) 8.64 ± .50 (.340 ± .020)

6.71 ± .10 (.260 + .005) (.260 - .000)

Governing dimensionsare in metric. Dimensions in parentheses are inches and are approximate. *Terminal centerline to centerline measurements made at point of emergence of the lead from the body.

CIRCUIT RESISTANCE CODE
DATE CODE

PIN ONE INDICATOR

MANUFACTURER'S TRADEMARK

How To Order

41 14 R - 1 - 152
Model (41 = Molded DIP) Number of Pins Physical Configuration (R = Thick Film Low Profile)Electrical Configuration • 1 = Isolated • 2 = Bussed • 3 = Dual Terminator Resistance Code • First 2 digits are significant • Third digit represents the number of zeros to follow. Consult factory for other available options.

Specifications are subject to change without notice.

4100R Series - Thick Film Molded DIPs
Isolated Resistors (1 Circuit) Model 4108R-1-RC (4 Isolated Resistors) Model4114R-1-RC (7 Isolated Resistors) Model 4116R-1-RC (8 Isolated Resistors) Model 4118R-1-RC (9 Isolated Resistors) Model 4120R-1-RC (10 Isolated Resistors) Bussed Resistors (2 Circuit) Model 4108R-2-RC (7 Resistors, Pin 8 Common) Model 4114R-2-RC (13 Resistors, Pin 14 Common) Model 4116R-2-RC (15 Resistors, Pin 16 Common) Model 4118R-2-RC (17 Resistors, Pin 18 Common) Model 4120R-2-RC (19 Resistors, Pin...